Roof Flashing Repair in Madisonville, LA
Big Easy Roofing repairs flashing across Madisonville and the Lake Pontchartrain shore of St. Tammany Parish. The parish’s own roofing sheet lists crickets behind wide chimneys among the most overlooked parts of the roofing code, and in our experience a missing one is a common reason chimney flashing keeps leaking.
Madisonville flashing repair at a glance
Flashing is the metal that carries water across the joint where the roof meets a wall, a chimney, a valley or a pipe. On a Madisonville chimney there is one more question: whether a cricket is there, because the parish roofing sheet calls for one behind any chimney more than 30 inches wide.
It is a joint, not a product
Flashing sits between roofing and whatever it abuts, so it gets blamed on the wall, the chimney or the cladding as often as on the roof. That ambiguity is why it goes unrepaired longer than anything else up there.
Estimated flashing repair
From a pipe boot at the low end to a valley at the high end, driven by length, access and whether the covering has to be lifted. Every figure here is an estimate, not a quote.
Crickets behind wide chimneys
The St. Tammany Parish roofing sheet lists: “Crickets and saddles shall be installed on the ridge side of any chimney or penetration more than 30 inches wide measured perpendicular to the slope.”
Rusted, damaged or deteriorated
The same sheet lists: “Any existing flashing, edging, outlets, and vents that are rusted, damaged, or deteriorated must be replaced.”
Sealant alone is a repeat visit
In our experience, a bead of sealant over a flashing that has lifted, shortened or corroded hides the symptom for a while, then moves and cracks in this heat and lets water back in.
Sometimes it is not the roof
Where water is getting in through failed masonry, a cracked chimney crown or the cladding above a flashing, new metal will not stop it. That is a different trade and we will tell you.
Every figure on this page is an estimate, not a quote, and is subject to Big Easy Roofing sign off. Cost and timescale depend on size, pitch, access, weather, materials and whatever is found once work starts, so call Big Easy Roofing on (504) 800-8196 and we will come out and give you an estimate for your own roof.
Every figure on this page is an estimate, not a quote, and is subject to Big Easy Roofing sign off. Call Big Easy Roofing on (504) 800-8196 about flashing on a Madisonville roof.
Five flashing jobs, and what each one involves
Flashing repairs fall into a few classes, and each fails in its own way. The table gives the scope and the estimated band for each, including the chimney cricket the parish sheet singles out, so you can see which job you have before anything is opened up.
| Flashing job | What usually fails | What the repair involves | Estimated |
|---|---|---|---|
| Chimney flashing and cricket | Water pooling on the uphill side of a wide chimney | Rebuild the flashing, and add a cricket where the chimney is over 30 inches wide | $500 to $1,500, plus any cricket |
| Step flashing at a wall | Short or lifted pieces at the wall junction | Lift the course, fit new step flashing, re-lay | $500 to $1,500 |
| Valley flashing | Worn or open metal where two slopes meet | Open the valley, replace the metal, close it back | $700 to $2,000 |
| Pipe boot or vent flashing | A split collar or rusted base | Replace the boot and seal the surrounding shingles | $300 to $650 |
| Rusted edge or counter flashing | Corrosion that has gone through | Replace the rusted metal rather than coat it | Priced on the run |
Every figure is an estimate and none of it is a quote. Whether a chimney is over 30 inches wide is measured across the slope, not guessed from the ground.
What the parish roofing sheet says about flashing
St. Tammany Parish Permits and Inspections publishes a one page roofing sheet, dated 23 August 2023, listing some of the most overlooked sections of the 2021 International Residential Code chapter 9. Two of them are about flashing, and a third is about when a permit applies.
Crickets and saddles
Crickets and saddles shall be installed on the ridge side of any chimney or penetration more than 30 inches wide measured perpendicular to the slope. A cricket turns the water around the chimney instead of letting it pool against it.
Existing flashing
Any existing flashing, edging, outlets, and vents that are rusted, damaged, or deteriorated must be replaced. In our practice that means new metal, not a coat over old.
When a permit applies
The 2023 sheet lists “R105.1 Permit required if replacing 50% of roof covering.” We ask the office that covers the address rather than rely on a 2023 line.
Whose sheet it is
The sheet is published on the St. Tammany Parish Permits and Inspections page. Inside town limits, Town Hall on (985) 845-7311 confirms which office covers the address.
Why a missing cricket keeps a chimney leaking
Water running down the roof meets the uphill face of a chimney and has nowhere to go. On a wide chimney that is a lot of water against one joint.
In our experience, re-sealing that joint without a cricket only buys time. Where the chimney is over 30 inches wide, the sheet calls for one.
When the source is not clear
If you know water is getting in but not where, that is leak detection and it comes first. The Madisonville roof leak detection page covers it.
Flashing is then priced from the finding rather than from a guess.
Why flashing fails on a Madisonville roof
Madisonville sits where the Tchefuncte River meets Lake Pontchartrain, hot and humid most of the year. In our experience flashing fails here in three ways: heat working on sealant, corrosion on old metal, and water with nowhere to go behind a wide chimney.
Heat works on the sealant
Every day the roof heats and cools, sealant at a flashing loses a little grip. Flashing that depends on sealant to stay dry is on borrowed time.
A good detail sheds water by its shape, with sealant as the backup.
Old metal corrodes
Rusted flashing does not recover. The parish sheet lists rusted or deteriorated flashing as something to replace, and that is how we price it.
Coating rust over looks finished and is not.
Wide chimneys collect water
A wide chimney holds back a wide band of water on its uphill side. Without a cricket that water sits against the flashing.
The width is measured across the slope before the scope is written.
Big Easy Roofing Process
Four steps. The chimney is measured before the scope is written, because its width decides whether a cricket belongs in it.

01 Find the failing joint
Wall, chimney, valley or penetration, photographed, with the source confirmed first.
02 Measure the chimney
Its width across the slope, so the scope says whether a cricket is needed.
03 Write the scope and the value
New metal where the old is rusted or damaged, the cricket where it applies, and the price.
04 Repair, and permit where it applies
Any permit goes to the office that covers the address, as Town Hall confirms.
Everything else we do in Madisonville
The rest of the Big Easy Roofing services available in Madisonville, each with its own page and written scope. Flashing is one class of entry point. If you know water is getting in but not where from, that is leak detection and it comes first.

Roof Replacement in Madisonville
Read More
Roof Repairs in Madisonville
Read More
Roof Inspection in Madisonville
Read More
Hail Damage Roof Repair in Madisonville
Read More
Storm Damage Roof Repair in Madisonville
Read More
Storm Damage Emergency Response in Madisonville
Read More
Emergency Roofing in Madisonville
Read More
Roof Leak Detection in Madisonville
Read More
Roof Maintenance in Madisonville
Read More
Roof Coating in Madisonville
Read More
Roof Ventilation in Madisonville
Read More
Roof Weatherproofing in Madisonville
Read More
Roof Restoration in Madisonville
Read More
Fascia Board Installation and Repair in Madisonville
Read More
Gutters and Downspouts Installation in Madisonville
Read More
Gutters and Downspouts Repair in Madisonville
Read More
Siding Installation in Madisonville
Read More
Asbestos Roof Removal in Madisonville
Read More
Roof Damage Documentation in Madisonville
Read More
Commercial Roof Replacement in Madisonville
Read More
Commercial Roof Repairs in Madisonville
Read More
Commercial Roof Inspections in Madisonville
Read More
Commercial Hail Damage Repair in Madisonville
Read More
Commercial Re-Roofing in Madisonville
Read More
Commercial Roof Coating in Madisonville
Read More
Commercial Elastomeric Coatings in Madisonville
Read More
Commercial Roof Ventilation in Madisonville
Read More
Commercial Roof Leak Detection in Madisonville
Read More
Commercial Siding Installation in Madisonville
Read MoreMadisonville Roof Flashing Repair FAQs
The questions worth asking before flashing is repaired on a Madisonville roof, including the chimney cricket rule.
Topic
Question not here?
Ask us anything about flashing on your Madisonville roof. No charge and no obligation.
Call (504) 800-8196How much does flashing repair cost in Madisonville?
A pipe boot is estimated at $300 to $650, a step flashing run or chimney flashing at $500 to $1,500, and a valley at $700 to $2,000. Every figure is an estimate.
What is a chimney cricket?
A small ridge built on the uphill side of a chimney so water runs around it instead of pooling against it. The parish roofing sheet calls for one behind any chimney or penetration more than 30 inches wide measured perpendicular to the slope.
Does my chimney need a cricket?
The parish sheet says crickets and saddles shall be installed on the ridge side of any chimney or penetration more than 30 inches wide measured perpendicular to the slope. We measure the width rather than guess from the ground, and the scope says whether a cricket is there.
Can rusted flashing be sealed or painted?
The parish sheet says existing flashing that is rusted, damaged or deteriorated must be replaced. In our practice that means new metal, not a coat over the old.
Does a flashing repair need a permit?
Ask the office that covers the address; Town Hall on (985) 845-7311 confirms which. The parish’s 2023 sheet lists a permit as required when replacing 50% of the roof covering, and we ask the office rather than rely on a 2023 line.
What if the water is coming through the chimney itself?
Then new flashing alone will not stop it. Failed masonry or a cracked chimney crown is a different trade, and we will say so.
Get the flashing rebuilt to shed water with the chimney measured
We find the failing joint, measure the chimney for a cricket, replace rusted metal rather than coat it, and put the scope and the price in writing before anything is opened up. If you would rather start in writing, tell us what the job involves and we will come back with an estimate.
Call (504) 800-8196



