Big Easy Roofing Logo
Claim Banner - Big Easy Roofing Big Easy Roofing roof replacement guarantee banner
Call Our Roofing Experts!(504) 800-8196
Home/Service Areas/Louisiana/Madisonville/Commercial Roof Ventilation

Commercial Roof Ventilation in Madisonville, LA

Big Easy Roofing handles commercial roof ventilation across Madisonville and the Lake Pontchartrain shore of St. Tammany Parish. The parish publishes a Mechanical Permit form, and whether a rooftop fan or vent change needs it is for the office that covers the address.

Assembly firstWhere the moisture goes
Mechanical PermitA parish form
Rev. 06/01/2026The form's revision date
6 monthsIn the form's void clause

Madisonville commercial roof ventilation at a glance

Most commercial roofs have no attic to vent, so the answer follows from the assembly under the membrane. St. Tammany Parish publishes a Mechanical Permit form; whether a given change needs it is a question for the office that covers the address.

Assembly first

Where the moisture goes

In our practice, the assembly is read before anyone proposes a vent or a fan.

The mechanical form

Rev. 06/01/2026

St. Tammany Parish links a “Mechanical Permit” form from its Permits and Inspections page, with boxes for electric and gas.

Its fields

Contractor, and gas

The form has a “Mechanical Contractor:” field, and says that for gas, the plumber must file.

Commercial jobs

Contract amount

It asks for the “Contract Amount (Commercial Only)”.

Six months

Or the permit is void

It says permits become null and void if work is not commenced within 6 months, or is suspended or abandoned for six months.

Whether it applies

Ask the office

Whether a given ventilation change needs this form is for the office that covers the address. Town Hall on (985) 845-7311 confirms which office that is.

Commercial ventilation work is scoped to the roof and the equipment, so call Big Easy Roofing for a scoped price.

Four commercial roof assemblies and where the moisture goes

The ventilation answer on a commercial roof follows from the assembly under the membrane. Four common assemblies put the insulation, and the moisture path, in different places, and in our practice the assembly is read first so a house attic answer is not applied where there is no attic.

AssemblyInsulation locationMoisture pathVentilation service
Conventional low slopeAbove the deck, under the membraneAir barrier and any vapour retarder; interior load handled by the HVACRooftop exhaust on point sources; no passive roof vents
Protected membraneAbove the membraneThe membrane below acts as the main vapour controlAs conventional
Metal buildingAt the roof panels and purlinsDepends on the insulation system and facingRooftop equipment, each penetration detailed through the panel
Ventilated attic, older buildingsBelow the deck, with a space aboveCross ventilation of the enclosed spacePassive venting scaled to the space, plus exhaust

These are general trade characteristics, not code text. The assembly is read on the roof before any ventilation work is scoped.

The parish mechanical permit form, and what it asks for

St. Tammany Parish publishes a Mechanical Permit form, revised 1 June 2026. It has a Mechanical Contractor field, asks for the contract amount on commercial jobs, and says a permit becomes void if work is not commenced within 6 months or is suspended or abandoned for six months.

The form

Electric or gas

Its header reads “Mechanical Permit” with boxes for “Electric” and “Gas (if gas, plumber must file)”.

The fields

Contractor and contract amount

It asks for the “Mechanical Contractor:”, the “Job Address:”, a “Description of Work:” and the “Contract Amount (Commercial Only):”.

Six months

Null and void

It reads: “Permits issued as a result of this application become null and void if work or construction authorized is not commenced within 6 months, or construction or work is suspended or abandoned for a period of six months at any time after work is commenced.”

Where to read it

The parish permits page

The form is linked from the St. Tammany Parish Permits and Inspections page.

What we take from that

In our reading, rooftop exhaust can involve mechanical work as well as roof work.

Whether a given change needs it is for the office that covers the address. We do not say either way.

The roof side

Every penetration through the membrane is detailed as roof work, in our practice.

Where a penetration leaks, the commercial leak page covers tracing it.

Why it matters on a Madisonville building

Madisonville sits where the Tchefuncte River meets Lake Pontchartrain, and in our experience commercial roofs here deal with humid air inside and heavy rain outside. Getting the assembly, the penetrations and the mechanical side right together keeps both out of the building.

Humid air inside

In our experience, moisture from inside is handled by the air barrier and the HVAC, not by roof vents, on most commercial roofs.

That is why the assembly is read first.

Penetrations

Each rooftop unit or fan is a hole in the membrane.

In our practice, each one is flashed and detailed as its own line.

For houses

A house attic is a different problem.

The residential ventilation page covers it.

Big Easy Roofing Process

Four steps. The assembly and the office come before any equipment.

A roofer taking a material sample from an older roof
01

01 Read the assembly

Insulation position and the moisture path.

02

02 Confirm the office

Town or parish by address, and whether a mechanical permit is involved.

03

03 Scope roof and mechanical

Penetrations detailed; equipment handled as the office directs.

04

04 Install and record

Each penetration flashed and photographed.

Everything else we do in Madisonville

The rest of the Big Easy Roofing services available in Madisonville, each with its own page and scope of work. For houses, the residential ventilation page covers attics, intake and exhaust, and the commercial leak page covers tracing water at a rooftop penetration.

Filter by service type:

Madisonville Commercial Roof Ventilation FAQs

The parish mechanical permit form, commercial roof assemblies, and how the work is priced.

Topic

Question not here?

Ask us about ventilation on a commercial roof in Madisonville. No charge and no obligation.

Call (504) 800-8196
Does St. Tammany Parish have a mechanical permit form?

It publishes a Mechanical Permit form, revised 1 June 2026, with a Mechanical Contractor field and boxes for electric and gas.

Does adding a rooftop fan need a mechanical permit?

We do not say either way. Ask the office that covers the address. Town Hall on (985) 845-7311 confirms which office that is.

When does a parish mechanical permit become void?

The form says permits become null and void if work is not commenced within 6 months, or is suspended or abandoned for six months.

Does a flat commercial roof need roof vents?

Most have no attic to vent. In our practice the assembly is read first, and moisture from inside is usually handled by the air barrier and the HVAC.

What does commercial roof ventilation work cost?

In our practice, it is scoped to the roof and the equipment after the assembly is read.

Get the roof and the equipment scoped together on a Madisonville building

We read the assembly, confirm the office and whether a mechanical permit is involved, and detail every penetration as roof work. If you would rather start in writing, tell us what the job involves and we will come back with an estimate.

Call (504) 800-8196
Commercial Roof Ventilationin Madisonville